MIPA EP-Grundierfiller EPOXY PRIMER 2k 1LTR GREY- ANTI CORROSIVE - FAST DELIVERY

MIPA EP-Grundierfiller EPOXY PRIMER 2k 1LTR GREY- ANTI CORROSIVE - FAST DELIVERY

COLOUR IS RAL 7032 PEBBLEGREY (BEIGE/ LIGHT GREY)

MIPA 2K EP Primer Filler Grey -  is a chromate free 2K-primer based on epoxide resin for efficient paintings of cars and industrial vehicles. This product combines the advantages of a primer/filler and an adhesive primer. High protection against corrosion and excellent adhesion, even on nonferrous metals. It is therefore especially suited for various kinds of composite substrates.

Features : Excellent filling power, adhesion to steel, aluminium, galvanized sheet metal; glass fibre reinforced plastics; shock and scratch resistant. High protection against corrosion, resistant to weathering, very good chemical and mechanical resistance. Re-coatable with a polyester putty after force drying (30 min. / 60 - 80° C) by a coat thickness of up to 120 μm EP-Primer-Filler.

This 2K Epoxy wash primer provides excellent adhesion to various substrates, even MDF panels. Also this 2K Epoxy wash-primer has good etching qualities on all ferrous metals and light alloys.

Some features of the MIPA 2K Epoxy primer-surfacer:

• Highly resistant to corrosion (contains anticorrosive pigments)
• Chromate-free
• Short drying time
• Mixing ratio: 2:1 with MIPA E10 Epoxy activator thinner
• Suitable substrates : Iron and steel, aluminium, sanded galvanized sheet, dried and sanded old paintings.
• Substrate preparation : Clean, dry, free of dust, rust, oil and grease. Sand and clean with Mipa Silikone Remover.
• Application process : Mipa EP-Primer-Filler can be applied through brushing, rolling or spraying (Air/Airless)
• Brushing and rolling: after mixing no dilution is necessary
• Wait 15 min. after the mixing of the two components before use.